| 不透水性：10 | 断裂伸长率：10% | 材质：PVC |
| 形态：微孔状 | 形状：片状 | 产地：济南 |
| 等级：10 | 抗弯强度：10 | 抗压强度：10 |
| 拉伸强度：10 | 品牌：天宇建 | 撕裂强度：10 |
| 芯材：pc | 防水产品类别：PVC防水卷材 | 规格：10 |
济南防水/谈到通常情况下，卫生间墙面的防水材料高度要达到30cm在淋浴区，尤其是安装了花洒的那面墙，防水层做足180cm。
Jinan water comes under normal circumstances, the bathroom wall waterproofing material to reach the height of 30cm in the shower area, especially that wall mounted shower, waterproof layer is preferably done 180cm.
济南防水介绍一般来说涂刷的防水层不会影响到墙砖的铺贴，但如果过于追求防水材料效果而一味地刷，导致防水层过厚，表面过于光滑，那么墙砖的铺贴就会受到影响。正常情况下，刷2～3遍就可以了，这时墙面上的防水层应该是明显并且均匀的，个别凸起或凹下去比较严重的地方可以重点再涂刷一次，这样的防水层就能够满足使用了，整体的涂刷效果应以不改变墙面凹凸结构为佳。因为只有在毛躁的墙面上，墙砖才能够牢固地贴在墙上。
Jinan waterproof introduce general brushing waterproof layer does not affect the brick paving, but if too blindly pursue waterproof material effect brush, resulting in a waterproof layer is too thick, the surface is too smooth, then the brick paving on will be affected. Under normal circumstances, the brush 2 to 3 times on it, then a waterproof layer on the wall should be clear and uniform, individual raised or sunken areas you can focus on more serious brushing once again, this waterproof layer on can be used to meet the overall brushing effects should not change the structure of the wall is preferably convex. Because only the edgy wall, wall to be able to be firmly attached to the wall.
济南防水/谈到如果卫生间的墙面本身就过于平整，则可以在做防水之前先用凿子将墙面拉毛，或者是用水泥和上108胶甩在墙面上，将墙体表面处理毛躁了之后再开始刷。经过这样的处理，就不用担心在后期铺贴墙砖的时候，墙面过于平整而挂不住砖了。
If it comes to Jinan waterproof bathroom wall itself is too smooth, it can be brushed with a chisel to the wall, or is thrown before a waterproof cement and 108 glue on the wall, the wall surface treatment after frizz then began to brush. After this treatment, do not worry about the time in the late paving tiles, wall tiles up too flat and embarrassing.
济南亘安信息提供技术支持/
