不透水性:10 | 断裂伸长率:10% | 材质:亚克力 |
形态:微孔状 | 形状:长方形 | 产地:济南 |
等级:10 | 抗弯强度:10 | 抗压强度:10 |
拉伸强度:10 | 品牌:天宇建 | 撕裂强度:10 |
芯材:pc | 防水产品类别:PVC防水卷材 | 规格:10 |
济南防水涂料我们应选单组分环保型的聚氨酯涂料,这种涂料是目前建设部极力推荐的防水材料。由于这种涂料能严密地包住管道与地面,渗入缝隙,在干燥后不会收缩,因此比防水水泥等刚性材料更适合用于卫浴间这种管道、缝隙较多的小面积房屋。
Ji'nan waterproof coating we should PU coatings menu component environment-friendly, this coating is the Ministry of construction recommended waterproof material. Because of this paint can closely encase the pipeline and the ground, infiltration of cracks in the dry will not shrink, and therefore more suitable for small area of housing bathroom this pipeline, gap more than the rigid material waterproof cement etc..
据了解,目前国内一些品牌聚氨酯涂料生产厂家都拥有自己的施工队伍,市民可在购买防水涂料的同时,要求厂家提供专业人员。为了让日后的防水期限更为长久,涂料一般需要刷上3遍,为了让涂料充分干透,所以不可选择在阴雨或潮湿气候下进行。
It is understood, at present some domestic brand polyurethane paint manufacturers have their own construction team, the public can buy in the waterproof coating at the same time, require manufacturers to provide professional personnel. In order to make waterproof term future more for a long time, paint brush on the general need for 3 times, in order to allow full paint dry, so do not choose in rainy or humid climates.
济南防水施工完毕后,要将卫生间的所有下水道堵住,在卫生间的门口砌一道"矮墙"进行注水试验,注水高度在20cm左右。24小时后检查,若卫生间的四周墙面和地面没有渗漏现象说明卫生间的防水质量很好。反之,要找出漏点,进行维修。
Ji'nan waterproof construction is completed, will all the sewer toilet block, in the bathroom door to assemble a "ha ha" water test, water injection height is about 20cm. 24 hours after the check, if the toilet metope and ground around no leakage phenomenon indicates that the quality of waterproof bathroom is very good. On the other hand, to find the leak, repair.
同时呢,墙面也要做济南防水处理。为了达到较好的防水效果,一般卫生间的墙面上也要做大约30cm高的防水处理,防止积水洇透墙面。
At the same time, the wall also do waterproof processing in Ji'nan. In order to achieve better waterproof effect, generally on the bathroom wall also be approximately 30cm waterproof processing high, prevent water spread through the wall.
济南亘安信息提供技术支持:/